battery tender plus instruction manual

This manual provides comprehensive instructions for using the Battery Tender Plus battery charger. It covers safety precautions, features and benefits, connection procedures, charging modes, troubleshooting tips, maintenance guidelines, warranty information, specifications, frequently asked questions, available models, and additional resources. Carefully read and understand all instructions before using the Battery Tender Plus to ensure safe and proper operation.

Introduction

Welcome to the world of Battery Tender Plus, the ultimate solution for maintaining and extending the life of your valuable lead-acid batteries. This manual serves as your comprehensive guide to understanding and utilizing the Battery Tender Plus, a revolutionary charger designed to deliver optimal performance and long-term battery health. Whether you’re a seasoned enthusiast or a novice user, this manual will empower you with the knowledge to harness the full potential of your Battery Tender Plus.

The Battery Tender Plus is not just a charger; it’s a sophisticated electronic device engineered to deliver precise charging and maintenance for various types of lead-acid batteries. From motorcycles and ATVs to watercraft and lawnmowers, the Battery Tender Plus is compatible with a wide range of applications, ensuring your battery remains in peak condition, ready for action whenever you need it.

This manual will delve into the intricacies of the Battery Tender Plus, covering everything from safety precautions and connecting the charger to understanding charging modes and troubleshooting common issues. We’ll guide you through the features and benefits of this innovative charger, empowering you to confidently use it for optimal battery care.

Our goal is to equip you with the necessary knowledge to make the most of your Battery Tender Plus, ensuring your batteries stay healthy and your equipment performs flawlessly for years to come.

Safety Precautions

Your safety is paramount. Before using the Battery Tender Plus, carefully read and understand the following safety precautions to ensure a safe and enjoyable experience. Failure to adhere to these instructions could result in serious injury, damage to property, or even death.

General Safety Rules⁚

• Avoid Contact with Battery Acid⁚ Battery acid is extremely corrosive and can cause severe burns. Wear protective eyewear and gloves when handling batteries. If acid comes into contact with skin or eyes, immediately flush the affected area with plenty of water for at least 15 minutes and seek medical attention.
• Proper Ventilation⁚ Ensure adequate ventilation when charging batteries. Battery gases are flammable and explosive. Never charge batteries in an enclosed space or near open flames.
• Disconnect Battery Before Working⁚ Always disconnect the battery from the charger and the vehicle before performing any maintenance or repairs. This prevents accidental electrical shocks.
• Avoid Spark-Producing Activities⁚ Never use tools or equipment that could generate sparks near a battery. Sparks can ignite battery gases, leading to an explosion.
• Keep Charger Dry⁚ Do not expose the Battery Tender Plus to water or moisture. It’s designed for indoor use only.
• Store Properly⁚ When not in use, store the Battery Tender Plus in a cool, dry place out of reach of children.

By following these safety precautions, you can ensure a safe and enjoyable experience while using the Battery Tender Plus. Remember, safety should always be your top priority.

Features and Benefits

The Battery Tender Plus is a cutting-edge battery charger designed to deliver optimal performance and longevity for your lead-acid batteries. This innovative charger boasts a range of impressive features and benefits that set it apart from traditional trickle chargers, ensuring your batteries remain in top condition.

• Automatic Switching⁚ The Battery Tender Plus features intelligent circuitry that automatically switches between full charge and float modes. This ensures that your battery is fully charged and maintained at the optimal storage voltage without overcharging, preventing damage and extending its lifespan.
• Safe and Reliable⁚ The Battery Tender Plus is designed with safety in mind. It includes spark-proof circuitry and reverse polarity protection, preventing damage to your battery and charger. This ensures a worry-free charging experience.
• Extended Battery Life⁚ The Battery Tender Plus’s float mode effectively prevents sulfation, a common problem that reduces battery capacity. This helps maintain your battery’s performance and extends its lifespan significantly.
• Versatile Applications⁚ The Battery Tender Plus is suitable for a wide range of lead-acid batteries, making it ideal for motorcycles, ATVs, watercraft, cars, and more. Its versatility ensures you have a reliable charging solution for all your battery needs.
• Easy to Use⁚ The Battery Tender Plus is incredibly user-friendly. Simply connect the charger to your battery and plug it into an AC outlet. The charger will automatically handle the rest, ensuring a hassle-free charging experience.
• Long Warranty⁚ The Battery Tender Plus is backed by an industry-leading 10-year warranty, providing peace of mind and assurance that your investment is protected.

With its impressive features and benefits, the Battery Tender Plus is the ultimate solution for maintaining your lead-acid batteries and ensuring their optimal performance and longevity.

Connecting the Battery Tender Plus

Connecting the Battery Tender Plus to your battery is a straightforward process that requires minimal effort. This section outlines the steps involved in ensuring a secure and proper connection for optimal charging performance.

1. Identify Battery Terminals⁚ Locate the positive (+) and negative (-) terminals on your battery. The positive terminal is typically marked with a red (+) symbol, while the negative terminal is marked with a black (-) symbol.
2. Connect the Battery Tender Plus⁚ Connect the red (+) clamp of the Battery Tender Plus to the positive (+) terminal of the battery. Securely fasten the clamp to ensure a strong connection. Subsequently, connect the black (-) clamp to the negative (-) terminal of the battery, ensuring a tight fit.
3. Plug in the Charger⁚ Once the clamps are securely connected to the battery terminals, plug the Battery Tender Plus into a standard AC power outlet. The charger will automatically begin charging the battery, indicating its operation with a green LED light.
4. Monitoring the Charging Process⁚ The Battery Tender Plus features LED indicators that provide visual feedback on the charging process. A green LED light indicates that the charger is connected and operating in float mode, maintaining the battery at optimal storage voltage. A red LED light indicates that the charger is in full charge mode, delivering a full charge to the battery.

It is crucial to ensure that the clamps are securely connected to the battery terminals and that the charger is plugged into a working AC outlet. Proper connection ensures optimal charging performance and prevents potential damage to the battery or charger.

Charging Modes

The Battery Tender Plus employs two distinct charging modes to ensure optimal battery health and performance. These modes are designed to deliver a full charge to the battery while preventing overcharging and promoting longevity. The two charging modes are⁚

1. Full Charge Mode⁚ This mode is activated when the Battery Tender Plus detects a discharged battery. It delivers a high charging current to quickly bring the battery to a full charge. The red LED light on the charger will illuminate during this phase, indicating active charging.
2. Float Mode⁚ Once the battery reaches a full charge, the Battery Tender Plus automatically switches to float mode. This mode maintains the battery at a safe and optimal storage voltage, preventing overcharging and sulfation. The green LED light on the charger will illuminate during this phase, signifying that the battery is fully charged and being maintained.

The Battery Tender Plus automatically transitions between these two modes, ensuring that the battery receives the appropriate charge level at all times. The automatic switching mechanism eliminates the need for manual intervention, simplifying the charging process. The float mode is particularly beneficial for long-term storage, as it prevents the battery from losing its charge and extends its lifespan.

By utilizing these two charging modes, the Battery Tender Plus effectively safeguards the battery from damage, optimizes its performance, and extends its overall lifespan.

Troubleshooting

While the Battery Tender Plus is designed for simplicity and reliability, occasional issues may arise. This section provides a guide to common troubleshooting steps to help resolve any problems you may encounter.

1. Charger Not Turning On⁚ Ensure the AC power cord is securely connected to a working outlet. Verify that the fuse in the charger is intact. If the fuse is blown, replace it with a fuse of the same rating.
2. Red LED Light Remains On⁚ This indicates the battery is not accepting a charge. Check the battery connections for corrosion or loose connections. Ensure the battery terminals are clean and free of debris. If the problem persists, the battery may be damaged and require replacement.
3. Green LED Light Not Illuminating⁚ This suggests the battery is not fully charged. Verify that the battery connections are secure and clean. If the battery has been left disconnected for an extended period, it may require a longer charging time to reach a full charge.
4. Charger Gets Warm⁚ This is normal during operation, as the charger converts AC power to DC power. However, excessive heat may indicate a problem. Ensure the charger is not in direct sunlight or in a confined space. If the charger remains excessively hot, discontinue use and contact Deltran support.

If you are unable to resolve the issue using these troubleshooting steps, consult the detailed troubleshooting checklist provided in the Battery Tender Plus user manual. It offers additional guidance and specific solutions for common problems. If the issue persists, contact Deltran customer support for assistance.

Maintenance

Regular maintenance of your Battery Tender Plus ensures optimal performance and longevity. Follow these simple steps to keep your charger in top condition⁚

1. Clean the Charger⁚ Periodically wipe the charger housing with a damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
2. Inspect the Connections⁚ Regularly check the AC power cord and battery cables for any signs of wear, damage, or loose connections. Replace any damaged components immediately.
3. Storage⁚ When not in use, store the Battery Tender Plus in a cool, dry place, away from direct sunlight and moisture. Avoid storing the charger in extreme temperatures or in areas where it may be exposed to corrosive substances.
4. Fuse Replacement⁚ The Battery Tender Plus is equipped with a fuse to protect it from electrical surges. If the fuse blows, replace it with a fuse of the same rating. Refer to the user manual for fuse replacement instructions.
5. Professional Service⁚ For any major repairs or service, contact Deltran customer support or an authorized service center. Avoid attempting to disassemble or modify the charger yourself, as this could void the warranty and potentially damage the unit.

By following these simple maintenance guidelines, you can extend the lifespan of your Battery Tender Plus and ensure it continues to provide reliable battery charging and maintenance for years to come.

Warranty Information

Deltran stands behind the quality and reliability of its Battery Tender Plus products with a comprehensive warranty. The standard warranty covers defects in materials and workmanship for a period of 10 years from the date of purchase. This warranty applies to all Battery Tender Plus chargers, including the 12V, 6V, and 8V models.

To be eligible for warranty coverage, the charger must be registered with Deltran within 30 days of purchase. You can register your product online or by mail. Deltran will repair or replace any defective charger at no cost to the original purchaser, provided the charger is used in accordance with the instructions in this manual.

The warranty does not cover damage resulting from misuse, abuse, neglect, accident, or unauthorized repairs. It also does not cover normal wear and tear, including damage to the charger’s housing, cables, or connectors.

For warranty claims, you must provide proof of purchase, such as a sales receipt or invoice. Contact Deltran customer support for further instructions and to initiate a warranty claim. They will be able to assist you with the process and provide any necessary information.

Specifications

The Battery Tender Plus is designed for use with six-cell lead-acid batteries ranging in capacity from 1.2 to 200Ah. It features a compact and lightweight design, making it easy to transport and store. The charger is equipped with a variety of safety features, including overcharge protection, reverse polarity protection, and short circuit protection, ensuring safe operation for both the charger and the battery.

Here are some key specifications of the Battery Tender Plus⁚

• Input Voltage⁚ 120VAC, 60Hz
• Output Voltage⁚ 12V or 6V (depending on model)
• Output Current⁚ 1.25A maximum
• Charging Modes⁚ Full Charge, Float Mode
• Dimensions⁚ 5.25″ x 2.75″ x 1.75″
• Weight⁚ 1.25 lbs
• Operating Temperature⁚ 32°F to 122°F (0°C to 50°C)
• Storage Temperature⁚ -4°F to 140°F (-20°C to 60°C)

These specifications provide a comprehensive overview of the Battery Tender Plus’s capabilities and operating parameters. For more detailed information, refer to the specific model’s instruction manual.

Frequently Asked Questions

Here are some commonly asked questions about the Battery Tender Plus⁚

• Q⁚ Can I leave the Battery Tender Plus connected to my battery indefinitely?
  
  A⁚ Yes, the Battery Tender Plus is designed to be left connected to the battery for extended periods. Its automatic charging and float modes prevent overcharging and ensure optimal battery health.
• Q⁚ How long does it take to fully charge a battery with the Battery Tender Plus?
  
  A⁚ The charging time depends on the battery’s capacity and condition. Generally, it takes several hours to fully charge a discharged battery.
• Q⁚ What happens if the Battery Tender Plus is connected to a battery with the wrong polarity?
  
  A⁚ The Battery Tender Plus has reverse polarity protection. If connected incorrectly, the charger will not operate to prevent damage to the battery or the charger.
• Q⁚ Is the Battery Tender Plus suitable for all types of batteries?
  
  A⁚ The Battery Tender Plus is specifically designed for six-cell lead-acid batteries. It is not compatible with other battery types like lithium-ion batteries.
• Q⁚ Can I use the Battery Tender Plus to jump-start a dead battery?
  
  A⁚ No, the Battery Tender Plus is not a jump starter. It is a maintenance charger designed to keep batteries charged and healthy over time.
• Q⁚ What is the warranty on the Battery Tender Plus?
  
  A⁚ The Battery Tender Plus comes with a 10-year warranty against defects in materials and workmanship.

If you have additional questions or concerns, consult the user manual or contact Deltran customer support for assistance.

Battery Tender Plus Models

Deltran offers a range of Battery Tender Plus models to suit various battery types and charging needs. Here are some of the popular models⁚

• Battery Tender Plus 12V 1.25A (PN 021-0128)⁚ This model is designed for 12-volt lead-acid batteries commonly found in motorcycles, ATVs, watercraft, and other vehicles. It delivers a maximum charging current of 1.25 amps and features automatic charging and float modes for optimal battery health.
• Battery Tender Plus 6V 1.25A (PN 021-0068)⁚ This model is designed for 6-volt lead-acid batteries often used in classic cars, golf carts, and other applications. It provides a maximum charging current of 1.25 amps and features the same automatic charging and float modes as the 12-volt model.
• Battery Tender Junior 6V 750mA (PN 021-0038)⁚ This smaller model is designed for 6-volt lead-acid batteries with lower capacity. It delivers a maximum charging current of 750 milliamps and is ideal for maintaining batteries in smaller applications.
• Battery Tender Junior 12V 750mA (PN 021-0138)⁚ This model is designed for 12-volt lead-acid batteries with lower capacity. It delivers a maximum charging current of 750 milliamps and is suitable for maintaining batteries in smaller applications.

Before purchasing a Battery Tender Plus model, ensure that it matches the voltage and capacity of your battery to ensure optimal charging performance and battery longevity;